Description
Jaw Crusher is most widely used in the international market and has the features of high crushing ratio, even granule, simple structure，easy maintenance, etc. It can be used for fine crushing and coarse crushing. The highest compressive resistance of the crushed materials is 320Mpa. The large and medium-size jaw crushers are the key products of our company. Especially in designing and producing the large-size jaw crusher, we have stood in the front line of our country.
Features:
High crushing ratio, high output, even granule, simple structure, easy maintenance, low producing cost.
Working Principle:
The motor drives the belts and the belt wheels, and make the movable jaw up and down by the eccentric shaft. When the movable jaw descends, the angle between the fixed jaw and the movable jaw becomes smaller, and the materials can be crushed; when the movable jaw rises, the angle between the fixed jaw and the movable jaw becomes bigger; and the movable jaw plate leaves from the fixed jaw by the function of the tension rod and the spring. And then the crushed materials are discharged from the lower outlet of the crushing cavity.
Technical advantages
High quality castings
Our machines use high-quality materials and imported quality. Reduce the wear of accessories and increase the life of the machine.
Easy replacement of accessories
The lubrication system adopts polymer composite pipe, which effectively reduces the occurrence of oil leakage, and the novel design reduces the difficulty of installing parts.
Overload protection
When the unbreakable material falls into the crusher and the machine exceeds the normal load, the automatic stop device can automatically stop to avoid damage to the entire machine and ensure production safety.
Low noise and less dust
Through innovative R&D and design, our machine has the advantages of less dust, green and environmental protection, and passed the local environmental protection policy.
Technical parameters
| Model | Feeding Size(mm) | Discharge Gatesize (mm) | Capacity(t/h) | Motor Power(kw) | Overall Dimension(mm) |
| PE150×250 | ≤130 | 15-45 | 1-4 | 5.5 | 896×745×935 |
| PE250×300 | ≤150 | 15-55 | 3-6 | 7.5 | 1050×987×1000 |
| PE250×400 | ≤210 | 25-60 | 5-20 | 15 | 1215×1520×1030 |
| PE400×600 | ≤350 | 40-90 | 15-60 | 30 | 1650×1588×1050 |
| PE500×750 | ≤425 | 50-100 | 40-110 | 45 | 1956×1918×1920 |
| PE600×900 | ≤500 | 60-125 | 90-180 | 55 | 2250×2733×2280 |
| PE800×900 | ≤600 | 80-140 | 100-220 | 75 | 2450×2950×2490 |
| PE750×1060 | ≤630 | 60-150 | 110-380 | 110 | 2531×2455×2783 |
| PE900×1060 | ≤700 | 100-160 | 230-390 | 110 | 2900×2657×2950 |
| PE900×1200 | ≤750 | 110-165 | 220-450 | 132 | 3100×2760×3260 |
| PE1000X1200 | ≤900 | 110-185 | 315-500 | 132 | 3200×2760×3260 |
| PE1200×1500 | ≤950 | 115-195 | 400-800 | 220 | 3710×3446×4075 |
| PE1500×1800 | ≤1200 | 135-225 | 500-1000 | 280 | 5100×4700×4300 |
| PEX150×750 | ≤120 | 10-40 | 8-25 | 15 | 1310×1118×1145 |
| PEX250×750 | ≤210 | 15-50 | 15-35 | 22 | 1400×1751×1515 |
| PEX350×750 | ≤300 | 15-50 | 18-40 | 30 | 1485×1680×1648 |
| PEX250×1000 | ≤210 | 15-60 | 15-60 | 30 | 1550×1964×1380 |
| PEX250×1200 | ≤210 | 15-60 | 20-60 | 37 | 1530×1946×1380 |
| PEX300×1300 | ≤250 | 25-60 | 16-105 | 55-75 | 2000×2320×1730 |
